PAAuf Lager
PAA-4x800 Installationsendstufe
Modellcode: YB-PAA4X800
Vierkanalige Class-D-Installationsendstufe, nur 1 HE hoch, mit 70-/100-V-Betrieb auf jedem Ausgang.
- Four channels of 480 W into 8 Ohm or 800 W into 4 Ohm
- 1 U chassis with front to rear cooling and speakON outputs
- Switchable 0.775 V / 1.4 V input sensitivity
- Selectable 70 V and 100 V constant voltage mode
Ships in 5-7 business days
Technische Daten
Ausgang
- Kanäle
- 4
- Verstärkerklasse
- Class D
- Leistung pro Kanal an 8 Ohm
- 480 W
- Leistung pro Kanal an 4 Ohm
- 800 W
- Brückenbetrieb
- 1600 W
Messwerte
- THD + N
- 0.02 %
- Rauschabstand
- 106 dB
- Dämpfungsfaktor
- 400
- Frequenzgang
- 20 Hz - 20 kHz (+0 / -0.5 dB)
Anschlüsse
- Eingangsempfindlichkeit
- 0.775 V / 1.4 V selectable
- Eingangsimpedanz
- 20 kOhm balanced
- Eingänge
- 3x XLR balanced with link out
- Ausgänge
- 4x speakON NL4
Mechanik
- Kühlung
- Two temperature controlled fans, front to rear
- Schutzschaltungen
- Clip limiter, thermal, DC, short circuit, VHF
- Bauhöhe
- 1 U
- Abmessungen
- 483 x 44 x 380 mm
- Nettogewicht
- 9.6 kg
Überblick
PAA-4x800 Installationsendstufe
The PAA-4x800 is a four channel Class D amplifier for fixed installation. It fits in 1 U and can drive either low impedance loudspeakers or 70 / 100 V distributed lines on every channel.
Each channel has its own clip limiter and thermal monitor, so a fault on one output does not affect the others. Inputs are electronically balanced on XLR with link outputs for daisy chaining.
Dokumente zu diesem Modell
- HerunterladenPAA-4x800 User ManualBedienungsanleitungenv1.019. Sept. 2026
- HerunterladenPAA-4x800 DatasheetDatenblattenv1.019. Sept. 2026
