
HFA-2500 Stereo Power Amplifier
Model code: YB-HFA2500
A 2 x 250 W Class AB flagship with two 800 VA transformers and enough current reserve for 2 Ohm loads.
- 2 x 250 W into 8 Ohm, 2 x 400 W into 4 Ohm, 800 W bridged
- Two 800 VA transformers and 160 000 uF of supply capacitance
- Temperature controlled fan that stays off below 45 degrees
- Twelve layer main board with a star ground per channel
Ships in 3-5 business days
Technical specifications
Output
- Channels
- 2
- Amplifier class
- Class AB
- Power per channel at 8 Ohm
- 250 W
- Power per channel at 4 Ohm
- 400 W
- Bridged output
- 800 W
Measured performance
- THD + N
- 0.004 %
- Signal to noise ratio
- 116 dB
- Damping factor
- 260
- Frequency response
- 5 Hz - 120 kHz (+0 / -1 dB)
Connectivity
- Input sensitivity
- 1.2 V for rated output (29 dB gain)
- Input impedance
- 47 kOhm unbalanced / 94 kOhm balanced
- Inputs
- 2x XLR balanced, 2x RCA, 1x 12 V trigger in
- Outputs
- A/B binding posts, 1x 12 V trigger out
Mechanical
- Cooling
- Passive with temperature controlled fan
- Protection
- DC offset, over-temperature, short circuit, soft start
- Rack height
- 3 U
- Dimensions
- 440 x 160 x 420 mm
- Net weight
- 24.8 kg
Overview
HFA-2500 Stereo Power Amplifier
The HFA-2500 doubles the output stage of the HFA-1200 and raises the supply to plus/minus 82 V. It delivers 250 W per channel into 8 Ohm and stays stable into 2 Ohm loads.
A temperature controlled fan engages only above 45 degrees Celsius, so the amplifier is silent in normal listening. Biasing is set per channel and can be re-adjusted through the top panel without removing the board.
Related models
Related models

HFA-D200 Integrated Amplifier
YB-HFAD200Compact Class D integrated amplifier with five inputs, 2 x 200 W and a subwoofer output with an 80 Hz high pass.

HFA-500M Mono Power Amplifier
YB-HFA500MA 500 W monoblock with a 100 kOhm balanced input and a 200 mm wide chassis built for short speaker cables.

HFA-1200 Stereo Power Amplifier
YB-HFA1200Dual mono Class AB stereo stage, 120 W per channel, 220 damping factor and a completely passive cooling path.