XOn request

X800 Professional Stereo Power Amplifier

Model code: MK-X800

2 × 800 W into 8 Ω, 2 × 1250 W into 4 Ω, 2500 W bridged, in a 22 kg 2U chassis with a ≥600 damping factor and <0.01% THD+N.

2 × 800 W into 8 Ω, 2 × 1250 W into 4 Ω, 2500 W bridged
Damping factor ≥600 at 8 Ω, 45 V/us slew rate, ≥80 dB channel separation
THD+N <0.01% at 8 Ω / 1 kHz, signal to noise ratio ≥110 dB
2U chassis 89 × 483 × 472 mm, 22 kg, DC / short circuit / over temperature / soft start protection

PricePrice on request

We sell by quotation: send us the models and the quantities and you will receive a proforma invoice including freight within one business day.

Quoted per order

Technical specifications

Output

Channels: 2
Power per channel at 8 Ohm: 800 W
Power per channel at 4 Ohm: 1250 W
Bridged output: 2500 W

Measured performance

THD + N: 0.01 %
Signal to noise ratio: 110 dB
Damping factor: 600
Frequency response: 20 Hz – 20 kHz +0/-0.3dB

Connectivity

Input sensitivity: 1.0V
Input impedance: 20 kΩ balanced / 10 kΩ unbalanced
Inputs: 2 × XLR balanced input + 2 × XLR link out
Outputs: 2 × speakON NL4 + binding posts

Mechanical

Protection: DC, short circuit, over temperature, soft start
Rack height: 2 U
Dimensions: 89 × 483 × 472 mm
Net weight: 22 kg

Overview

X800 Professional Stereo Power Amplifier

The X series is the value line of the range. Three two channel models cover 600, 800 and 1000 W per channel at 8 Ω, with up to 3200 W bridged on the X1000.

The differences against the higher series are deliberate: the damping factor is ≥600 at 8 Ω and the slew rate 45 V/us, still with ≥110 dB signal to noise and ≥80 dB channel separation. Instead of a selectable sensitivity, each model is set at one of 0.775 V, 1.0 V or 1.4 V at the factory, so it can be matched directly to the preamp in the rack.

THD+N stays below 0.01% at 8 Ω / 1 kHz on the X1000 and the X800, below 0.05% on the X600. All three are 2U and weigh 23, 22 and 20 kg. Protection is unchanged: DC offset, short circuit, over temperature and soft start.

The X800 is one of the power steps of the series: 2 × 800 w into 8 ω, 2 × 1250 w into 4 ω, 2500 w bridged, 22 kg in a 2U chassis measuring 89 × 483 × 472 mm. It shares the circuit, the protection design and the measured performance of the rest of the X Series, so the choice inside a series comes down to output power and chassis height.

Power ratings follow the EIA standard and are measured with a 40 ms pulse of a 1 kHz sine wave at 1% total harmonic distortion.

MaikeAudio keeps the right to explain the parameters above. Specifications can change without notice; the manual shipped with the product is the authoritative version.